Operator building wire harnesses at Micromex
Home  /  Bridge Manufacturing

Your bridge to manufacture in Mexico. The option you didn't know you had.

We own the building, employ the people and handle the permits, quality and management. You decide how involved you want to be, from hands-off to engineers on our floor.

The short answer

Bridge Manufacturing is Micromex’s model for producing in Mexico. Micromex owns and runs the plant in Imuris, Sonora and employs everyone on your line, so you carry no capital, no headcount and no employment liability. Unlike a sealed contract manufacturer, you keep full visibility and as much control as you want.

Compare the models

The speed of outsourcing. The control of owning the plant.

Bridge gives you what a contract manufacturer gives — speed, no capital, no headcount — plus the control and visibility of running your own plant. And Micromex carries the employment liability.

Compare Bridge with

vs contract manufacturing: no plant and no headcount either way, but a contract manufacturer runs production its own way and you have limited visibility inside. With Bridge nothing is sealed: your engineers are welcome on our floor.

Micromex Bridge Manufacturing compared with contract manufacturing, shelter and campus models
What you getOur modelMicromex BridgeWe run the plant. You stay as involved as you want.Contract manufacturingTheir plant, their process, limited view insideYou give up control and visibilityShelterYou set up and run the operation under their umbrellaYou give up the hands-off part: you equip and run the operation and pay for the teamCampusYou run production in their buildingYou give up the hands-off part: you equip and run the operation and pay for the team
Like contract manufacturing
Speed to launch
WeeksThe plant, permits and trained team are already in place
Fast, if they have capacityQuoting, tooling and part approval come first
3–6 months, typicallyFrom decision to production, as providers quote it
As little as 30 days to start3–6 months to production is typical
Capital you put in
None requiredUse our equipment, or bring yours
None for a plantTheir plant and equipment
Your equipment and set-upEquipment, tooling and process utilities are yours to fund
Your equipment and set-upThe building is theirs; equipment and utilities for your line are yours
Headcount you carry
NoneMicromex hires, trains and manages your whole line
None
The whole team’s costThe shelter is employer of record; you set roles and pay and direct the team
The whole team’s costThe provider is employer of record; you set roles and pay and direct the team
Equipment
Your choiceUse ours, or own yours: we bond it and handle the temporary import
Theirs
Yours to fundBrought in under the shelter’s IMMEX program
Yours to fundThe provider coordinates installation
Who runs the line day to day
MicromexWe manage the team; you stay as involved as you want
The manufacturerIt runs production and sets priorities
YouYou direct, supervise and train the team
YouYou direct, supervise and train the team
Like running your own plant
Your control
As much as you wantDirected through Micromex management, with your engineers on our floor or on a call
LowThey run production; changes mean renegotiating
Full
Full
Your visibility
FullWatch your line any time
LimitedLimited view into processes, decisions and standards
Full
Full
Who carries the risk
Employment liability
Stays with MicromexStaffing changes and severance are never passed to you
With the manufacturer
SplitLegal duties: the shelter. Terminations are your decision and severance your cost
SplitLegal duties: the provider. Terminations are your decision and severance your cost

Based on how each model usually works and on what providers publish (November 2026). Details vary by provider.

The Micromex team in front of the Imuris plant
Employer of recordMicromex, Inc.
Your production. Our people.

We employ the team. The liability stays with us.

Hiring, payroll, benefits and Mexican labor law are hard to get right from another country. With Bridge Manufacturing, Micromex is the employer of every person on your line. When volumes change, staffing is our job, and the employment obligations never pass to you.

Micromex carries

  • Recruiting, hiring and training
  • Payroll, benefits and IMSS social security
  • Mexican labor-law compliance
  • Turnover and retention
  • Severance and staffing changes when volumes shift

You keep

  • Your product, specs and IP
  • Your quality standards
  • As much involvement as you want
  • Zero employees on your books in Mexico
Why it’s called Bridge

The best of each model, connected.

Contract-manufacturing simplicity

No plant to lease and no employees to hire. Use our equipment, or own yours and we bond it and handle the temporary import.

Shelter-level visibility

Nothing is sealed. Walk the line, station your engineers with it, or check in from your desk.

Zero employment risk

Micromex is the employer of record, and the employment obligations under Mexican labor law stay with us.

Consigned or turnkey

Keep your supply chain and consign material, let us source everything, or mix the two by part.

Adjust as you go

No fixed package. We set the structure together and change it together as your program grows.

Weeks, not quarters

The plant, IMMEX certification and trained workforce are already in place.

Transformer winding at Micromex
What we build

Labor-intensive builds, from prototype to production.

Bridge programs cover everything from short runs to dedicated lines.

  • Wire harnesses and cable assemblies, built to print
  • Electrical and electromechanical assemblies and sub-assemblies
  • Transformers and magnetics
  • Kitting, specialty packaging and rework at scale
Assembly line in Imuris, Sonora
Certified

The certifications that keep your savings intact.

Documented process control, traceability and inspection as routine, backed by a 100% Quality Assurance Program.

ISO 9001:2015IMMEX since 2006UL & ETLSMETA 4-PillarWCA
Compare models

Bridge vs. contract manufacturing, shelter and campus.

Answer three questions and the best fit is highlighted.

REVIEWED NOVEMBER 2026
How involved do you want to be?
Want to direct your own team in Mexico?
When do you need production?
General comparison, based on how each model usually works and on what providers publish (November 2026). Details vary by provider — ask us to model your program.
Micromex BridgeOur plant, our peopleContract manufacturingTheir plant, their processShelterTheir legal umbrella, your operationCampusTheir building, your operation
Who owns the buildingMicromexThe manufacturer, or its landlordThe shelter provides it, owned or leased; with some, real estate is separateThe campus provider, which runs and maintains it
EquipmentOurs, or yours: we bond it and handle the temporary importThe manufacturer’sYours to fund, brought in under the shelter’s IMMEXYours to fund; the provider coordinates installation
Who employs the peopleMicromex, which hires, trains and manages themThe contract manufacturerThe shelter, as employer of record; you direct the teamThe campus provider, as employer of record; you direct the team
Who runs production day to dayMicromex; you stay as involved as you wantThe manufacturerYouYou
Employment liabilityStays with Micromex, severance includedWith the manufacturerLegal duties with the shelter; severance is your costLegal duties with the provider; severance is your cost
Speed to launchWeeksFast, if they have capacityTypically 3–6 monthsAs little as 30 days to start; typically 3–6 months
Your controlAs much as you want, through Micromex managementLowFullFull
Your visibilityFullLimitedFullFull
Capital you put inNone required; equipment optionalNone for a plantYour equipment and set-upYour equipment and set-up
Headcount you carryNoneNoneThe whole team’s costThe whole team’s cost
MaterialConsigned or turnkeyUsually turnkeyYoursYours
Changing the programWe adjust it togetherRenegotiate the contractYour call, your costYour call, your cost
Best forBrands that want control without running a plantProducts you want to hand off entirelyCompanies that want to run their own operation without forming a Mexican companyCompanies that want to run their own operation in a ready building
How a partnership starts

Four steps to first shipment.

  1. Scope

    Share prints, BOM, volumes and how involved you want to be.

  2. Propose

    Get a program proposal in about two weeks and tour the plant.

  3. Pilot

    First-article inspection, process validation and your sign-off.

  4. Ramp

    Scale to volume with weekly reporting. We staff the line; you carry no headcount.

Savings calculator

What would it cost to build it in Sonora?

Answer a few questions about your line. See your estimated savings in under a minute.

In every Micromex rate
  • Wages and Mexican benefits
  • Supervisors and quality inspectors
  • Engineering
  • Floor space and electricity
  • Management and admin
  • IMMEX administration
STEP 1 OF 5

Your production

Start with what you build and where you build it today.

What do you build?

Buying from an overseas supplier? Choose “Outside the US & Canada.”

Continue to my estimate
Answers

Bridge Manufacturing questions.

What is Micromex Bridge Manufacturing?

A way to produce in Mexico where Micromex owns the plant, the people, the permits, quality and management — while you stay as involved as you want to be.

Most ways to build in Mexico make you choose between control and convenience. A shelter or a campus gives you control, but you run the operation, fund the equipment and pay for the team, severance included, even though the provider is the employer of record. A contract manufacturer is hands-off, but it runs production its own way and you have limited visibility into the process. Bridge connects the two: we own and run everything, your engineers can be on our floor or on a call, and material can be consigned or turnkey.

How is Bridge Manufacturing different from contract manufacturing?

Nothing is sealed. Like contract manufacturing, you carry no plant and no headcount, and you also get full visibility and as much control as you want.

With a typical contract manufacturer you send a print and a purchase order and product shows up. The manufacturer runs production and sets priorities, you have limited visibility into the process, and changes mean renegotiating. With Bridge, your engineers are welcome on our floor, you see the line, your supply chain can stay yours, and we adjust the program together as you go.

How is Bridge Manufacturing different from a shelter?

With a shelter you run the operation, and the team’s costs, severance included, are yours. With Bridge, Micromex runs the line, and staffing changes and severance stay with Micromex.

A shelter company is the employer of record and handles the legal entity, IMMEX, payroll and customs, and many shelters also provide the building. You define the roles and pay, direct and supervise the team, and decide on overtime and terminations, and severance is your cost. You also fund your own equipment. Shelter providers typically quote about 3 to 6 months from decision to production. Bridge keeps the involvement and visibility of a shelter without the equipment to buy, the floor to run or the severance risk, and most Bridge programs are up and running in weeks.

Who employs the workers?

Micromex does. Every person on your line is a Micromex employee.

We recruit, hire, train and pay the team, provide benefits and Mexican social security (IMSS), and manage turnover and retention. You never have employees in Mexico on your books.

Who carries the employment liability?

Micromex. Employment obligations under Mexican labor law stay with us and are never passed on to you.

Labor-law compliance, severance and staffing changes when volumes go up or down are our responsibility as the employer. You get a stable, trained team without the legal and financial exposure of employing people in another country.

What happens if our volumes change?

We plan staffing changes with you, and the hiring, retraining and severance that come with them stay on our side.

Because Micromex is the employer, ramping up or scaling down never becomes a hiring drive or a layoff on your books. Tell us your forecast and we’ll staff the line to match.

Can our engineers work on the Micromex floor?

Yes. Your engineers can be on our floor or on a call — as involved as you want.

Visibility is the point of Bridge. Visit any time, station your own engineers or quality staff with the line, or check in remotely. Our Tucson team is on Arizona time and a short drive from the plant.

What’s the difference between consigned and turnkey material?

Consigned means you own and supply the material. Turnkey means Micromex sources and manages it.

You can keep your current supply chain and consign material to us, let us buy and manage everything, or mix the two by part. Under IMMEX, imported material for export production has its duties deferred either way.

What does Micromex build?

Wire harnesses and cable assemblies, electrical and electromechanical assemblies, transformers, specialty packaging and kitting, plus remanufacturing.

Builds range from low-volume prototypes to full production runs. We also run sub-assembly builds that drop straight into your line, retail-ready packaging and multi-component kits. Many programs start as a problem another supplier declined to solve.

See all 40 answers

Start a partnership

We don’t find customers. We build partnerships.

Tell us what you build, your volumes and what you want to improve. We’ll come back with a recommended program, a cost estimate and a timeline — and an honest answer on whether we’re the right fit.

Skip to content